Mist Blower

Home » Products » Mist Blower

This mist blower has extremely strong wind force, and it also has other great features including reliable performance, easy start, low oil consumption, small volume and light weight. Based on these properties, this machine can be used in many fields. For example, it can blow dust when building and mending road, sand on the railway, snow in the yard or on the outdoor transformer, and fallen leaves in the garden. Also, it can be applied for forest fire prevention, and it can be used as an alternative air blower in the restaurant when the electricity goes out.

Technical Parameters
Model AS768 Mist Blower
Tank Capacity 22L
Range ≥9m
Mating Power 135F-P
Mixed Fuel Ratio Separate
Power 0.7kW / 6500r/min
Working Pressure 1.5-2.0Mpa
Plunger Diameter 18mm
Stroke 7mm
Net Weight 9.5kg
Packing Dimension 41×36×68.5cm
Model AS800 Mist Blower
Tank Capacity 25L
Range ≥9m
Mating Power 139F
Mixed Fuel Ratio Separate
Power 0.7kW / 6500r/min
Working Pressure 1.5-2.0Mpa
Plunger Diameter 18mm
Stroke 8mm
Net Weight 11kg
Packing Dimension 46×40×64.5cm
Model AS800A Mist Blower
Tank Capacity 25L
Range ≥9m
Mating Power 135F
Mixed Fuel Ratio Separate
Power 0.7kW / 6500r/min
Working Pressure 1.5-2.0Mpa
Plunger Diameter 18mm
Stroke 8mm
Net Weight 11kg
Packing Dimension 46×40×64.5cm

Maintenance
1. Check frequently if the bearing temperature is in the acceptable range, and the bearing temperature should be lower than 70°C while the temperature rise should be below 40°C.
2. Detect the working current of this mist blower regularly, and normally, the working current is smaller than rated current.
3. Make sure that the belt gearing is safe and reliable, and bearing lubricant is good and enough.
4. Collision should be avoided for the rotating parts, and please tighten the bolt of every retaining element.
5. After the mist blower has worked for about one consecutive month, you should add calcium-sodium-based grease or molybdenum disulphide grease to the bearing with the help of a grease gun. If the machine has continuously worked for 3-6 months, detections for rolling bearing should be carried out, and the items include the tightness level between the rolling element and inner and outer rings, the tightness degree between the inner ring and shaft. Meanwhile, at this time, you should also change the lubricating grease, and the new grease should take up 2/3 space of the bearing.

The maintenance should be carried out regularly, and you'd better clean the dust and dirt inside the machine. If any abnormal phenomena regarding temperature, vibration and noise, etc. take place during the start, stop or running process, you must check and repair the machine immediately.

Our company is a professional mist blower manufacturer and supplier in China. We provide a wide range of products, including power engine, industrial mist duster, two stroke grass trimmer, garden power sprayer and more.

Related Names
Mist Sprayer | Mist Blowing Device | Strong Force Mist Blower | Gardening Tool

Feedback Form
Other Products